C
OPYING
4.13
4
Changing the Default Settings
Copy options, including darkness, original type, copy size and
number of copies, can be set to the most frequently used
modes. When you copy a document, the default settings are
used unless they are changed by using the corresponding
buttons on the control panel.
To create your own default settings:
1
Press
Menu/Exit
on the control panel until "Copy Setup"
appears on the top line of the display.
The first menu item, "Default-Change", appears on the
bottom line.
2
Press
Start/Enter
to access the menu item. The first setup
option, "Darkness", appears on the bottom line.
3
Press the scroll button (
or
) to scroll through the setup
options.
4
When the option you want to set appears, press
Start/
Enter
to access the option.
5
Change the setting using the scroll button (
or
).
6
Press
Start/Enter
to save the selection.
7
Repeat steps 3 through 6, as needed.
8
To return to Standby mode, press
Stop/Clear
.
N
OTE
: While you set copy options, pressing
Stop/Clear
cancels
the changed settings and restores their default status.
To Next Page
Loading...
