Xerox Work Centre PE114e - Creating a Watermark

P RINTING
3.16
Creating a Watermark
1 To change the print settings from your software application,
access the printer’s Properties. See page 3.2.
2 Click the Extras tab and click Edit in the Watermark
section. The Edit Watermarks window appears.
3 Enter text message you want to print in the Watermark
Message
box.
The message displays in the preview image window.
When the
First Page Only box is checked, the watermark
prints on the
first page only .
4 Select the watermark options.
You can select the font name, style, and size, and gray
scale level from the
Font Attributes section and set the
angle of the watermark from the
Message Angle section.
5 Click Add to add a new watermark to the list.
6 When you finish creating, click Ok and start printing.
To stop printing the watermark, select
<No Watermark> on
the
Watermark drop-down list.