M
AINTENANCE
6.2
Printing the System Data List
Your machine can print the system data report shows the status
of the user-selectable options. You may print this list to confirm
your changes after changing any settings.
To print the system data list:
1
Press
Menu/Exit
until "Report" appears on the top line of
the display.
"System Data" appears on the bottom line.
2
Press
Start/Enter
.
The system data list prints out.
Clearing the Memory
You can selectively clear information stored in your machine’s
memory.
1
Press
Menu/Exit
on the control panel until "Maintenance"
appears on the top line of the display.
2
Press the scroll button (
or
) until you see "Clear
Settings" on the bottom line and press
Start/Enter
.
The first available menu item, “Paper Setting” displays on
the bottom line.
3
Press the scroll button (
or
) until you see the item you
want to clear.
• Paper Setting: Restores all of the Paper Setting options to
the factory default.
• Copy Setup: Restores all of the Copy Setup options to the
factory default.
• All Settings: Resets all of your settings to the factory default.
• Machine Setup: Resets all of the system settings, such as
the display language and save modes, to the factory default.
4
Press
Start/Enter
. The selected memory is cleared and
the display asks you to continue clearing the next item.
5
To clear another item, press
Start/Enter
and repeat steps 3
and 4
. Or, to return to Standby mode, press
Stop/Clear
.
To Next Page
Loading...
