G
ETTING
S
TARTED
1.22
Power Save Mode
Power Save mode allows your machine to reduce power
consumption when it is not in actual use. You can turn this mode
on by selecting the length of time for which the machine waits
after a job is printed before it switches to a reduced power state.
1
Press
Menu/Exit
until "Machine Setup" appears on top line
of the display.
2
Press the scroll button (
or
)
until "Power Save" appears
on the bottom line. Press
Start/Enter
.
3
Press the scroll button (
or
) to display "On" on the
bottom line and press
Start/Enter
.
Selecting "Off" means that Power Save mode turns off.
4
Press the scroll button (
or
) until the time settings you
want appears.
The available options are 5, 10, 15, 30 and 45 (minutes).
5
Press
Start/Enter
to save the selection.
6
To return to Standby mode, press
Stop/Clear
.
To Next Page
Loading...
Need help?
General
