M
AINTENANCE
6.9
6
Cleaning the Drum
If there are streaks or spots on your print, the OPC drum of the
cartridge may require cleaning.
1
Before setting the cleaning procedure, make sure that
paper is loaded in the machine.
2
Press
Menu/Exit
on the control panel until "Maintenance"
appears on the top line of the display.
The first available menu item, "Clean Drum", displays on
the bottom line.
3
Press
Start/Enter
.
4
When the display asks you to confirm your selection, press
Start/Enter
.
The machine prints a cleaning page. Toner particles on the
drum surface are affixed to the paper.
5
If the problem remains, repeat steps 1 through 4.
To Next Page
Loading...
