P
RINTING
3.8
Setting Graphic Properties
Use the following graphic options to adjust the print quality for
your specific printing needs. See page 3.2 for more information
about accessing printer properties.
Click the
Graphics
tab to display the properties shown below.
Source
Make sure that
Source
is set to the
corresponding paper tray.
Use the
Manual Feed
source when printing to
special material. You need to load one sheet at a
time into the manual feeder. See page 2.9.
If the paper source is set to
Auto Select
, the
machine automatically picks up print material in
the following order: the manual feeder and the
paper tray.
Type
Make sure that
Type
is set to
Printer
Default
. If you load a different type of print
material, select the corresponding paper type.
For more information about print materials, see
Chapter 2, Paper Handling.
If you use cotton paper, set the paper type to
Thick
for the best printing.
To use recycled paper, which weighs from 75g/
m
2
to 90g/m
2
(20lb to 24lb), or colored paper,
select
Color Paper
.
Property Description
3
4
1
3
2
To Next Page
Loading...
