P
APER
H
ANDLING
2.10
C
AUTION
: You must open the rear output slot when you print on
transparencies. If not, they may tear while exiting the machine.
2
Adjust the paper guide to the width of the print material.
N
OTE
: When printing on previously printed paper from the
manual feeder, the printed side should be facing down with an
uncurled edge to the machine. If you experience problems with
paper feed, turn the paper around.
3
Open the rear cover to use the rear output slot.
4
After printing, close the rear cover.
To Next Page
Loading...
