EasyManuals Logo

Xerox WorkCentre 3045 User Manual

Xerox WorkCentre 3045
206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #177 background imageLoading...
Page #177 background image
Troubleshooting
WorkCentre 3045 Multifunction Printer 177
User Guide
Symptom Solutions
The printed output is foggy.
Clean the developer. For details, see Cleaning the Developer on page 152.
Auger marks appear on the printed
output.
Use PrintingScout to check the toner level. If the toner cartridge is near
empty, replace it.
Verify that the toner cartridge is approved for use in this printer, and
replace it as needed. For best results, use a genuine Xerox
®
toner
cartridge.
Clean the developer. For details, see Cleaning the Developer on page 152.
The output print is wrinkled or
stained.
Verify that the paper is the correct size, type, and weight for the printer
and that it is loaded properly. If not, change the paper.
Change the Paper Type settings in the print driver.
In the Printing Preferences of the print driver, on the Paper/Output tab,
change the Paper Type setting.
Envelopes are wrinkled or creased
when printed.
Check if the crease is within 30 mm of the four edges of the envelope.
If yes, it is printing as expected. Your printer is not faulty.
If not, take the following actions:
For Number 10 envelopes, which are 220 mm or longer and have a flap
along the long edge, rotate the envelope 180 degrees.
For C5 envelopes, which are 220 mm or longer and have a flap along the
short edge, load them with the flaps open, facing up.
For Monarch or DL envelopes, which are shorter than 220 mm, load
them long-edge feed with the flaps open and facing up.
If the problem persists, use a different size envelope.

Table of Contents

Other manuals for Xerox WorkCentre 3045

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre 3045 and is the answer not in the manual?

Xerox WorkCentre 3045 Specifications

General IconGeneral
Duplex printingNo
Print technologyLED
Maximum resolution1200 x 1200 DPI
Time to first page (black, normal)8 s
Print speed (black, normal quality, A4/US Letter)24 ppm
All-in-one functionsCopy, Fax, Print, Scan
Compatible operating systemsWindows XP\\r Windows Vista\\r Windows Server 2003\\r Windows Server 2008\\r Windows 7\\r Mac OS v10.5+
Printing colorsBlack
Maximum duty cycle30000 pages per month
Number of print cartridges1
Maximum copy resolution600 x 600 DPI
Time to first copy (black, normal)24 s
Scan toE-mail, FTP, USB
Output color depth8 bit
Image formats supportedJPG, TIF
Document formats supportedPDF
FaxingMono faxing
Modem speed33.6 Kbit/s
Auto-redialingYes
Fax coding methodsJBIG, MH, MMR (Fax coding method), MR
Fax speed dialing (max numbers)99
Paper input typePaper tray
Total input capacity150 sheets
Total output capacity100 sheets
Maximum input capacity175 sheets
Multi-Purpose tray input capacity10 sheets
Auto document feeder (ADF) input capacity15 sheets
Custom media width76 - 216 mm
Maximum print size216 x 356 mm
Custom media length127 - 356 mm
Paper tray media typesEnvelopes, Labels, Plain paper, Recycled paper
Paper tray media weight60 - 163 g/m²
Non-ISO print media sizesLegal
ISO A-series sizes (A0...A9)A4
Auto Document Feeder (ADF) media weight60 - 105 g/m²
DisplayLCD
Market positioningHome & office
Standard interfacesUSB 2.0
Internal memory128 MB
Sound power level (standby)15 dB
Sound pressure level (printing)54 dB
AC input voltage220 V
AC input frequency50 - 60 Hz
Power consumption (off)2.8 W
Power consumption (standby)51.4 W
Power consumption (average operating)332 W
Operating temperature (T-T)10 - 32 °C
Operating relative humidity (H-H)10 - 85 %
Sustainability certificatesENERGY STAR
CertificationTUV, UL/CSA, CB/IEC, FCC
Weight and Dimensions IconWeight and Dimensions
Depth389 mm
Width410 mm
Height318 mm

Related product manuals