Xerox WorkCentre 4260 Series User Manual

Network Accounting
Xerox WorkCentre 4260 Series System Administration Guide 179
Network Accounting
Problem Action
I cannot use this feature on the
machine.
1. Press the <Log In/Out> button on the machine to enter the
Tools pathway.
2. Enter the Administrator’s Password. The default is [1111].
3. Tou ch [Enter].
4. Press the <Machine Status> button.
5. Tou ch the [Tools] tab.
6. Tou ch [Accounting].
7. Tou ch [Accounting Enablement].
8. Tou ch [Authentication Mode].
9. Check that Network Accounting is enabled.
Test the communication between the Network Accounting Server and
the Xerox machine.
1. At your Workstation, open the web browser, enter the IP
Address of the Xerox machine in the address field, and press
[Enter].
2. The machine Internet Services web pages should appear. If it
does not, verify the IP Address settings on the machine. If you
do not have a web browser, test connectivity by pinging the IP
Address of the machine from your Network Accounting server.
3. Verify that your Network Accounting server is configured
correctly. Consult the manufacturer's documentation with your
Network Accounting server to perform this task.

Xerox WorkCentre 4260 Series Specifications

General

Brand	Xerox
Model	WorkCentre 4260 Series
Category	All in One Printer
Language	English