Xerox WorkCentre 4265

Maintenance
Xerox
®
WorkCentre
®
4265 Multifunction Printer 135
User Guide
Cleaning the Interior
To prevent stains inside the printer that can deteriorate print quality, clean the interior of the printer
regularly. Clean the printer interior whenever you replace the drum cartridge.
After clearing paper jams or replacing a toner cartridge, inspect the inside of the printer before closing
the printer covers and doors.
• Remove any remaining pieces of paper or debris. For details, see Clearing Paper Jams on page 152.
• Remove any dust or stains with a dry, clean cloth.
WARNING: To avoid injury, never touch a labeled area on or near the heat roller in the fuser. If a
sheet of paper is wrapped around the heat roller, do not try to remove it immediately. Switch off the
printer immediately and wait 30 minutes for the fuser to cool. After the printer cools, try to remove
the jammed paper. If the error persists, contact your Xerox representative.