Xerox WorkCentre 4265 User Manual

Paper and Media
Xerox
®
WorkCentre
®
4265 Multifunction Printer 67
User Guide
Loading Labels in a 520-Sheet Feeder (Trays 1-4)
To load labels in a 520-sheet feeder:
1. Remove all paper from the tray.
2. Load the labels face up with the top edge to the right.
3. Adjust the guides until they touch the edges of the paper.
4. Close the tray.
5. If the control panel prompts you, verify the paper size, type, and color in the Paper Settings screen.
6. When finished, touch Confirm.
Transparencies
You can print transparencies from the bypass tray or from Trays 1-4.
Guidelines for Printing Transparencies
• Remove all paper before loading transparencies in the tray.
• Handle transparencies by the edges using both hands. Fingerprints or creases can cause poor print
quality.
• After loading transparencies, change the paper type to Transparency on the printer control panel.
• In the print driver software, select Transparency as the paper type.
• Do not load more than 20 transparencies. Overloading the tray can cause the printer to jam.
• Do not fan transparencies.

Xerox WorkCentre 4265 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax, Email
Print Resolution (Max)	Up to 1200 x 1200 dpi
Memory (Standard)	2 GB
Memory (Maximum)	2 GB
Connectivity	10/100/1000Base-T Ethernet, USB 2.0
Paper Output	250 sheets
Scan Resolution (Optical)	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Media Sizes Supported	Legal, Letter
Mobile Printing	Apple AirPrint
Duplex Printing	Automatic
Display	7-inch color touchscreen