Xerox WorkCentre 4265 User Manual

Printing
82 Xerox
®
WorkCentre
®
4265 Multifunction Printer
User Guide
Releasing a Personal Print Job
1. At the printer control panel, press the Job Status button.
2. Touch the Personal & Secure Jobs tab.
3. Touch the folder that holds the print job.
4. Touch Skip Passcode, then touch OK.
5. Touch the corresponding print job in the list, then touch Print.
Deleting a Personal Print
1. At the control panel, press the Job Status button.
2. Touch the Personal & Secure Jobs tab.
3. Touch the folder that holds the print job.
4. Touch the corresponding print job in the list, then touch Delete.
Sample Set
The Sample Set job type allows you to print a sample copy of a multiple-copy job and hold the
remaining copies at the printer. After you review the sample copy, you can select the job name from the
printer control panel to print the additional copies.
Releasing the Remaining Prints After Printing a Sample Set
1. At the printer control panel, press the Job Status button.
2. Touch the corresponding print job from the Active Jobs tab.
3. Touch Release.
The job prints, then is deleted from the printer hard drive.

Xerox WorkCentre 4265 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax, Email
Print Resolution (Max)	Up to 1200 x 1200 dpi
Memory (Standard)	2 GB
Memory (Maximum)	2 GB
Connectivity	10/100/1000Base-T Ethernet, USB 2.0
Paper Output	250 sheets
Scan Resolution (Optical)	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Media Sizes Supported	Legal, Letter
Mobile Printing	Apple AirPrint
Duplex Printing	Automatic
Display	7-inch color touchscreen