Xerox WorkCentre 4265 User Manual

Installation and Setup
Xerox
®
WorkCentre
®
4265 Multifunction Printer 37
User Guide
4. In the Installation Wizard, to begin, select your chosen language and keyboard layout, then touch
Next.
5. On the Product Enablement Settings screen, follow the directions.
6. At step 2 of the Installation Wizard, insert the Product Enablement Key into the card reader slot at
the back of the printer.
7. When the green LED light stops blinking and remains illuminated for approximately 10 seconds,
remove the Product Enablement Key from the card reader slot.
8. Touch Continue.
9. Configure settings as needed, then to restart the printer and save your settings, touch Restart. To
adjust your settings, touch Back.
10. When the Services screen appears, the printer is ready for use.
If the printer prompts you for Supplies Plan Activation during setup, enter your activation code.

Xerox WorkCentre 4265 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax, Email
Print Resolution (Max)	Up to 1200 x 1200 dpi
Memory (Standard)	2 GB
Memory (Maximum)	2 GB
Connectivity	10/100/1000Base-T Ethernet, USB 2.0
Paper Output	250 sheets
Scan Resolution (Optical)	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Media Sizes Supported	Legal, Letter
Mobile Printing	Apple AirPrint
Duplex Printing	Automatic
Display	7-inch color touchscreen