Xerox WorkCentre 4265 User Manual

Paper and Media
Xerox
®
WorkCentre
®
4265 Multifunction Printer 57
User Guide
4. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
Note: To avoid jams and misfeeds, do not remove paper from its packaging until you are ready to
use it.
5. Load the paper in the tray.
6. Load hole punched paper with the holes toward the rear of the printer.
7. For 1-sided and 2-sided printing, to load letterhead or pre-printed paper, place letterhead face down
with the top edge going into the printer.
Note: Do not load paper above the maximum fill line. Overfilling the tray can cause the printer to
jam.
8. Adjust the width guides until they touch the edges of the paper.
9. If the control panel prompts you, verify the paper size, type, and color in the Paper Settings screen.
10. When finished, touch Confirm.

Xerox WorkCentre 4265 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax, Email
Print Resolution (Max)	Up to 1200 x 1200 dpi
Memory (Standard)	2 GB
Memory (Maximum)	2 GB
Connectivity	10/100/1000Base-T Ethernet, USB 2.0
Paper Output	250 sheets
Scan Resolution (Optical)	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Media Sizes Supported	Legal, Letter
Mobile Printing	Apple AirPrint
Duplex Printing	Automatic
Display	7-inch color touchscreen