Xerox WorkCentre 5765 - Enable Server Fax; Configure a Server Fax Repository

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
290
• If the server fax solution uses the TCP/IP protocol to communicate, it is recommended that the
server be assigned a static IP Address. However, dynamic IP Addressing may be used provided
DNS settings are fully configured and the DHCP server has been configured with sufficient lease
time so that the normal maintenance and service down times of the fax server does not result in a
change in IP Address.
Print a Configuration Report to verify that Server Fax is an Installed Option:
1. Press the <Machine Status> button.
2. Touch the [Machine Information] tab.
3. Touch [Print Reports].
4. Touch [Print Report].
5. Touch [Close].
The Configuration Report will print. On the report check under Installed Options heading if Network
Server Fax is installed and enabled.
Enable Server Fax
At the Device:
Note: To configure this feature or these settings access the Tools pathway as a System
Administrator. For details, refer to Access Tools Pathway as a System Administrator on page 18.
1. From the Tools pathway, touch [Service Settings].
2. Touch [Optional Services].
3. Scroll down, by touching the scroll arrow, touch [Server Fax].
4. Touch [Enable].
5. Touch [Save].
6. Press the <Log In/Out> button.
7. Touch [Logout] to exit the Tools Pathway.
Configure a Server Fax Repository
The device can be configured to transfer the fax images to a directory on the fax server. The directory is
known as the fax repository. The fax server monitors the fax repository for documents to be faxed.
Select your required transfer method from the list below.
• FTP (File Transfer Protocol) - requires an FTP server running on a server or a workstation.
• NetWare - this available only if the Network Protocol is enabled. This requires a NetWare server.
• SMB (Server Message Block) - available for filing to an environment that supports the SMB
protocol.
• HTTP/HTTPS - supports scans to a web server using a CGI script.
• SMTP (Simple Mail Transfer Protocol) - available to file to a mail server.