WorkCentreâ„¢ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
294
• Authenticated User and Domain - select this method to be used in conjunction with the
network accounting or another authentication method, such as Secure Access, to
validate the user.
• Authenticated User - when selected, the device will prompt to log in using your own
network credentials.
• System - selecting this method allows the device to authenticate to the server with the
credentials entered in the [Login Name], [Password] and [Retype Password] entry
fields.
g. Check the [Select to save new password] checkbox, if you want to change the password for
an existing Login Name.
5. Click on the [Apply] button to accept the changes.
6. Configure the Default settings. Refer to Configure Default Settings on page 296.
Configure a Fax Repository using HTTP/HTTPS
Information Checklist
Before starting the procedure, ensure the following items are available or tasks have been performed:
• Ensure that web services are installed on the server where you want to store scanned images.
Examples of web servers include: Microsoft Internet Information Services (IIS) and Apache. Note
the IP Address or host name of the server.
• For HTTPS, ensure that your web server is installed with a secure certificate.
• Create a user account and password for the device. When a document is scanned, the device logs
in using the account, transfers the file to the server or workstation and logs out. Note the user
account and password details.
• Create a directory on the HTTP/HTTPS server to be used as a scan filing location (repository). Note
the directory path.
• Note any script that is required to be run.
Enter the Fax Repository Details via Internet Services
At your Workstation:
Note: To configure this feature or these settings access the Properties tab as a System
Administrator. For details, refer to Access Internet Services as System Administrator on page 24.
1. From the Properties tab, click on the [Services] link.
2. Click on the [Server Fax] link.
3. Select [Fax Repository Setup] in the directory tree.
4. In the Settings area:
a. Select HTTP or HTTPS from the [Protocol] drop-down menu.
b. Select either [IPv4 Address], [IPv6 Address] or [Host Name].
c. Enter details of the Repository Server in the IP Address: Port or Host Name: Port field.
d. To view the proxy server settings, click on the [View HTTP Proxy Server Settings] link.
To Next Page
Loading...
Need help?
General
