WorkCentreâ„¢ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
297
b. For Confirmation Sheet, select the type of information that you want to be included with the
Confirmation Sheet from the drop-down menu:
• Errors Only - this setting will produce a Confirmation Sheet only when error information
is detected.
• On - this setting will always produce a Confirmation Sheet that will provide error
information and job status.
• Off - this setting will not produce a Confirmation Sheet.
c. Click on the [Save] button to return to the Fax - Default page.
Fax
1. From the Fax - Defaults page, in the Fax area, click on the [Edit] button. The Fax page displays.
a. In the Server Fax area, for [2 Sided Scanning] select the required document scanning option,
either [1 Sided], [2 Sided] or [2 Sided, Rotate Side 2].
b. Select the required method used to optimize the quality of your scanned output images
based on the content in your original documents for [Content Type].
c. Specify the resolution from the [Resolution] drop-down menu. The resolution affects the
amount of detail reproduced on graphic images, and transmit time. Select [Standard (200 x
100 DPI)] or [Fine (200 DPI)].
d. Click on the [Apply] button to return to the Fax - Default page.
Image Quality
1. From the Fax - Defaults page, in the Image Quality area, click on the [Edit] button. The Image
Quality page displays.
a. In the Image Quality area, for Lighten / Darken, use the [Lighten] or [Darken] arrow
buttons to adjust the overall brightness of the original output.
b. For Background Suppression, select either [No Suppression] or [Auto Suppression]. Use this
feature to prevent the reproduction of an unwanted background image, shading or bleed-
through from the reverse side of the original. This will produce an output image with a mostly
white background.
c. For Soften/Sharpen, use the left [Soften] or right [Sharpen] arrow buttons to adjust the
overall softness or sharpness of the original output.
d. For Manual Contrast, use the left [Least Contrast] or right [Most Contrast] arrow buttons to
adjust the overall contrast of the original output
e. Click on the [Apply] button to return to the Fax - Default page.
Layout Adjustment
Layout Adjustment setting includes Original Size. This allows you to choose either [Auto Detect]
which allows the device to automatically detect the original size of the document, or [Manual Size
Input] which requires the user to select the size of the document, or [Mixed Size Originals] if the
original documents are of mixed sizes.
1. From the Fax - Defaults page, in the Layout Adjustment area, click on the [Edit] button. The
Layout Adjustment page displays.
2. Select the required options.
3. Click on the [Apply] button to accept changes and return to the Fax - Default page.
To Next Page
Loading...
Need help?
General
