Xerox WORKCENTRE 7120 - Stapling; Punch

dc10cc0466
Customer Support Page 10
STAPLING
This command indicates use and location of staple(s).
PJL
@PJL SET STAPLE=string;
Where string is:
TOPDUAL
TOPLEFT
TOPRIGHT
BOTTOMDUAL
BOTTOMLEFT
BOTTOMRIGHT
LEFTDUAL
RIGHTDUAL
SADDLE
NONE
PUNCH
This command indicates hole punches for a print job on a device with hole punch capability.
PJL
@PJL SET PUNCH = value1
@PJL SET JOBATTR = ”@PNHN = value2”
Where value1 is one of the following:
TOP
RIGHT
LEFT
BOTTOM
NONE
Where value2 is one of the following:
TWO = 2 holes
THREE = 3 holes
FOUR = 4 holes