Xerox WORKCENTRE 7120 - Offset; BOOKLET (with SB-Finisher and Booklet Module); PUNCH (with SB-Finisher)

dc10cc0471
Customer Support Page 23
OFFSET
<</Jog int >> setpagedevice
Where value is one of the following:
true = collated
false = uncollated*
BOOKLET (with SB-Finisher and booklet module)
<</Booklet value1
/BookletDetails << /Type 3
/StapleType int
/PrintInside value2
>>
>>
setpagedevice
Where value1 is one of the following:
true = Do Booklet.
false = Do not Booklet*
Where int is one of the following:
0 = Do not file on inside*
1 = File on inside.
Where value2 is one of the following:
true = Print on inside*
false = Print on outside
This feature is effective only in conjunction with that StapleType is 0.
PUNCH (with SB-Finisher)
<</Punch int1
/PunchDetails << /Type 5
/Position int2
/Numholes int3 >>
>>
setpagedevice
Where int1 is one of the following:
0 = Do not punch*
3 = Do punch by set unit.
Where int2 is one of the following:
0 = topside
1 = bottom side
2 = left side
3 = right side
Where int3 is one of the following:
2 = 2 holes*
3 = 3 holes
4 = 4 holes