dc10cc0466
Customer Support Page 5
PCL Feature List
Feature Description
Job Name Job Name
Job Mode Specify Job Mode
Banner Sheet (Start Sheet) Turns on/off the banner sheet that prints at the beginning of every job.
Copies Specifies the number of uncollated sets of a document in a print job.
Quantity Specifies the number of collated sets of a document.
Simplex / Duplex Printing Deliver one-sided or two-sided output
Orientation Landscape or Portrait
Job Type You can specify Confidential Print or Proof Print
Delay Print Delays printing a job until the time specified by the command.
Media Source Specifies the tray to supply the job’s media.
Custom Media Size Specifies the designated media size.
Output Location Indicates the output bin where the print job is sent.
Stapling Indicates use and location of staple(s).
Punch Indicates hole punches for a print job on a device with hole punch capability.
Folding Indicates to fold the print job.
Booklet
Enable printing documents as small booklets. The pages are reordered sequentially and
are oriented so that when they are folded, the paging is correct.
Resolution Sets the resolution value.
Bits Per Pixel Sets the color depth value.
Force Short Edge Feeding Indicates the feed edge to use.
Job Based Accounting /
Auditron
Allows entry of accounting information.
PCL/PJL Implementation
This section describes the PCL commands for specific features. This table lists each feature and the PCL syntax that is required to
use the feature. Following this table are examples of how to use these commands and what the PCL file looks like.
JOB NAME
PJL
＠PJL SET JOBNAME = “jobname-string”
Where jobname-string is a maximum of 32 characters
JOB MODE
PJL
@PJL JOB MODE = value
Where value is one of the following:
PRINTER = Printer
To Next Page
Loading...
