Xerox WORKCENTRE 7120 - Features

dc10cc0471
Customer Support Page 19
PostScript Implementation
This section describes the PostScript commands required to access specific WorkCentre features. This table lists each feature and
the PostScript syntax that is required to use the feature. Following this table are some examples of how to use these commands
and what the PostScript file looks like. (* denotes the default value)
COPIES
<</NumCopies value >> setpagedevice
Where value is one of the following:
1 to 9999 = number of copies
null = Not specified*
COLLATION
<</Collate value >> setpagedevice
Where value is one of the following:
true = collated
false = uncollated*
DUPLEX
<</Duplex value>> setpagedevice
Where value is one of the following:
true = Duplex
false = Simplex*
TUMBLE
<</Tumble value>> setpagedevice
This feature is effective only in conjunction with that Duplex is true
Where value is one of the following:
true = Tumble (Short edge binding Duplex)
false = Duplex (Long edge binding Duplex)*
MEDIA SOURCE
<</MediaPosition int >> setpagedevice
Where int is one of the following:
0 = Tray1
1 = Tray2
2 = Tray3
3 = Tray4
null = Auto*