dc10cc0466
Customer Support Page 9
CUSTOM MEDIA SIZE
This command specifies the custom media size on which to print the job. Insert a media size command within the PCL
portion of the print job.
PCL
Width of Custom Paper is specified by <ESC>&f#I
where # = decipoints for (89 - 297)mm.
Length of Custom Paper is specified by <ESC>&f#J
where # = decipoints for (98 - 432)mm.
For example:
4.25-inch x 5.5-inch will give <ESC>&f3060I3960J
by
4.25-inch x 720 decipoints/inch = 3060
and
5.5-inch x 720 decipoints/inch = 3960.
MEDIA SOURCE
This command specifies the tray to supply the job’s media.
PJL PCL
@PJL SET MEDIASOURCE = value <ESC>&l intH
Where value is one of the following:
TRAY1 = Feed from paper tray1
TRAY2 = Tray2
TRAY3 = Tray3
TRAY4 = Tray4
TRAY5 = Tray5(Bypass)
Where int is one of the following:
0 = Feed paper from default tray
4 = Tray1
1 = Tray2
5 = Tray3
8 = Tray4
20 = Auto
2 or 3 = Tray5 (Bypass)
OUTPUT LOCATION
Indicates the output bin where the print job is sent.
PJL PCL
@PJL SET OUTBIN = value <ESC>&l int G
Where value is one of the following:
MAINTRAY = Center Tray
MAINTRAY2 = Center Tray - Upper
OUTBIN101 =
Finisher Tray (w/ A-Finisher or SB-Finisher)
BOOKLETTRAY =
Right Bottom Tray(Booklet Maker) (w/ SB-Finisher and
booklet module)
Where int is one of the following:
0 = Automatic Selection
1 = Center Tray
4 = Center Tray - Upper
6 = Finisher Tray (w/ A-Finisher or SB-Finisher)
To Next Page
Loading...
