Xerox WORKCENTRE 7120 - Use Cie Color; Dependencies;Caveats; Sample Postscript Headers

USE CIE COLOR
<</UseCIEColor value>> setpagedevice
Where value is one of the following:
true = Re-map each color from device color space to device independent’s CIEbased color space
false = Do not re-map color*
Dependencies/Caveats
 All DSC (Document Structure Convention) comments are ignored and not interpreted.
 Valid media sizes for duplexing are between [ 362 x 396 ] and [ 842 x 1224] (point) or all sizes that can be fed from
tray1 - 4.
 Valid media sizes for stapling include A4 (210 x 297mm), A3 (297 x 420mm), B5 (182 x 257mm), B4 (257 x 364mm),
Executive (7.25 x 10.5"), Letter (8.5 x 11"), 8.5 x 13", Legal (8.5 x 14"), Tabloid (11 x 17"), 16K (194 x 267mm), 8K (267
x 388mm), 16K (195 x 270mm), 8K (270 x 390mm) for Finisher A/SB. For Finisher SB, 8 x 10", 215 x 315mm, 11 x 15",
A4 Cover, 9 x 11" are also valid.
 Valid media classes for duplex are Bond, Plain, Recycled, Custom 1-5, Hole Punched, Letterhead, Pre-Printed, Other,
Lightweight Cardstock (including A-S), Lightweight Glossy Cardstock.
 Valid media classes for staple are Bond, Plain, Plain Reload, Recycled, Custom 1-5, Hole Punched, Letterhead, Pre-
Printed, Other, Lightweight Cardstock (including A-S), Lightweight Cardstock Reloaded (including A-S), Cardstock
(including A-S), Cardstock Reloaded (including A-S), Heavyweight Cardstock, Heavyweight Cardstock Reloaded,
Lightweight Glossy Cardstock, Lightweight Glossy Cardstock Reloaded, Glossy Cardstock, Glossy Cardstock Reloaded,
Heavyweight Glossy Cardstock, and Heavyweight Glossy Cardstock R are also valid.
Sample PostScript Headers
Example 1 - Simple Print
%!PS
Example 2 - Header for Finishing
Note:
This example shows:
 Letter paper
 Duplex
 10 copies with
collation
 Stapling with left-
upper single and
finisher tray as output
bin
(Letter paper, duplex, 10 copies with collation, stapling with left-upper single and
finishe
r tray for output bin)
%!PS
<< /DeferredMediaSelection true >> setpagedevice
<</PageSize [612 792]>>setpagedevice
<</Duplex true /Tumble false>>setpagedevice
<</OutputType (FINISHER TRAY)>>setpagedevice
<</Collate true>>setpagedevice
<</NumCopies 10>>setpagedevice
<</Staple 3 /StapleDetails << /Type 7 /Location 0 >> >>setpagedevice
dc10cc0471
Customer Support Page 28