dc10cc0471
Customer Support Page 27
BRIGHTNESS
<</DeviceRenderingInfo <<
/Type 26
/Brightness int >>
>> setpagedevice
Where int is one of the following:
5 = Bright(+5)
4 = Bright(+4)
3 = Bright(+3)
2 = Bright(+2)
1 = Bright(+1)
0 = Normal*
-1 = Dark(-1)
-2 = Dark(-2)
-3 = Dark(-3)
-4 = Dark(-4)
-5 = Dark(-5)
SEPARATIONS
<</Separations value >> setpagedevice
Where value is one of the following:
true = Multiple color separations will be generated for each page of output.
false = All colorants will be combined into a single composite page on a single sheet of physical medium*
SEPARATION COLOR NAMES
<</SeparationColorNames value>>>> setpagedevice
Where value is an array.
Legal element values are the process colorant names implied by the process color model.
Valid colorant names for each process color model are like the following in case of separation
DeviceCMYK = Cyan, Magenta, Yellow, Black
DeviceCMY = Cyan, Magenta, Yellow
DeviceRGB = Red, Green, Blue
DeviceRGBK = Red, Green, Blue, Gray
DeviceGray = Gray
SEPARATION ORDER
<</SeparationOrder value>> setpagedevice
Where value is an array.
Legal element values are the process colorant names implied by the process color model.
To Next Page
Loading...
