17
Making Copies on the Single Pass Feeder
(XD103f/
105f/ 120f/ 125f)
Use the Single Pass Feeder(SPF) to make one collated copy of originals.
The SPF holds up to 30 originals (20 lb/80 gsm) in one job. Ensure
originals are in good condition, and that all staples and paper clips have
been removed. Use the document glass to make copies from
transparencies, facsimile paper, or originals having other unusual
characteristics. For reliable copying operation, use originals within the
following ranges:
Paper weight range: 16 to 24 lb/60 to 90 gsm
Paper size range: 5.5×8.5"/A5, 8.5×11"/A4 and 8.5×14"/216×353 mm
The SPF comes from the factory with the Auto Start feature enabled. Refer
to Customizing Your Copier section of this User Guide for information
about changing this setting.
78%
Auto
86%
100 %
129%
200% Max
50% 200%
D
O
C
U
M
E
N
T
10
1
W
o
r
k
C
e
n
t
r
e
C
1. Select the required paper tray.
2. Select the desired copy features from
the control panel.
•
The maximum copy quantity is 1.
Reinsert the originals into the SPF for
each set required.
3. Adjust the paper guide to the original
size.
Note: Writing that is very close to the
leading or trailing edge of the original may
not copy. Turning the original around in
the SPF may help.
4. Insert up to 30 originals face up into the
SPF until the green SPF light on the
copier diagram comes on.
To Next Page
Loading...
Need help?
General
