6
Installation
As you unpack the WorkCentre, familiarize yourself with its contents. After
the WorkCentre is installed, and the Ready Indicator is lit, the WorkCentre
is ready to make copies.
IMPORTANT:
Save the carton and packing materials. They should be
used to repack the WorkCentre if it has to be shipped for servicing or in
case you move.
* Note:
To ensure reliability of the WorkCentre use the IEEE-1284
compliant parallel cable that is supplied with the machine. Only cables
labeled “IEEE-1284” can be used with your WorkCentre.
Drum cartridge
(installed in the
machine)
Packing material
Power cord
Starter toner
cartridge
IEEE-1284
Parallel Cable
*
User documentation/
Installation CD
To Next Page
Loading...
Need help?
General
