18
Making Copies on the Automatic Document
Feeder
(XD130df/155df)
The Automatic Document Feeder (ADF) allows you to automatically make
single sided or two-sided copies. The ADF holds up to 30 originals
(20 lb/80 gsm). Ensure originals are in good condition, and that all staples
and paper clips have been removed. Use the document glass to make
copies from transparencies, facsimile paper, or originals having other
unusual characteristics. For reliable copying operation, use originals within
the following ranges:
Paper weight range: 16 to 24 lb/60 to 90 gsm
Paper size range: 5.5×8.5"/A5 (Short Edge feed only)
8.5×11"/A4 and 8.5×14"/216×353 mm
The ADF comes from the factory with the Auto Start feature disabled.
Refer to Customizing Your WorkCentre section of this User Guide for
information about changing this setting.
Note: Automatic two-sided copying is available only in the copying mode,
not the print mode.
The available copy options are:
Icon Original Copy
Max
Quantity
(2
!
1)
Two-sided Single sided 100 sets
(2
!
2)
Two-sided Two-sided 1 set
(1
!
2)
Single sided Two-sided 1 set
(1
!
1)
Single sided Single sided 100 sets
Single sided original to single sided copies (1
!
!!
!
1)
This mode will create single sided copies from your originals.
1. Place the originals face up in the ADF.
2. Select the
icon (1 to 1) and any additional features
and the desired quantity.
3. Press Start to begin copying.
The WorkCentre will produce the requested number of
uncollated (1,1,1…2,2,2…3,3,3…) single sided sets.
To Next Page
Loading...
Need help?
General
