Xerox WorkCentre XD100 - Page 27

19
Making Copies on the Automatic Document
Feeder
(XD130df/155df)
Single sided originals to two-sided copies (1
!
!!
!
2)
This mode will create two-sided copies from your single sided
originals.
1. Place the originals face up in the ADF.
2. Select the
icon (1 to 2) and any additional
features.
•
The maximum copy quantity is 1. Reinsert the originals
into the ADF for each set required.
3. Press Start to begin copying.
The WorkCentre will produce one set of two-sided copies.
Two-sided originals to two-sided copies (2
!
!!
!
2)
This mode will create two-sided copies from your two-sided
originals.
1. Place the originals face up in the ADF.
2. Select the
icon (2 to 2) and any additional features.
•
The maximum copy quantity is 1. Reinsert the originals
into the ADF for each set required.
3. Press Start to begin copying.
The WorkCentre will produce one set of two-sided copies.
Two-sided originals to single sided copies (2
!
!!
!
1)
This mode will create single sided copies from your two-sided
originals.
1. Place the originals face up in the ADF.
2. Select the
icon (2 to 1) and any additional features
and the desired quantity.
3. Press Start to begin copying.
The WorkCentre will produce the number of uncollated single
sided sets that you requested.