Xilinx Virtex-6 FPGA Getting Started Guide

Virtex-6 FPGA Connectivity Kit Getting Started www.xilinx.com 47
UG664 (v1.4) July 6, 2011
Modifying the Virtex-6 FPGA Targeted Reference Design
On successful completion of the build, the driver file (xaui.sys) is available
under [objfre_wxp_x86|objchk_wxp_x86]\i386 depending on the build
environment selected. The Setup Information file (xaui.inf) is also available in
the same directory.
e. Compile Raw Data path code: Navigate to the windows_driver/xraw directory
and execute the following
build /w -ceZ
This command invokes the Microsoft make routines to build the driver
components (Figure 41).
On successful completion of the build, the driver file (xraw.sys) is available
under [objfre_wxp_x86|objchk_wxp_x86]\i386 depending on the build
X-Ref Target - Figure 40
Figure 40: XAUI Driver Compilation
X-Ref Target - Figure 41
Figure 41: Raw Data Driver Compilation
UG664_70_052011
UG664_71_052011

Xilinx Virtex-6 FPGA Specifications

General

Brand	Xilinx
Model	Virtex-6 FPGA
Category	Transceiver
Language	English