Xilinx Virtex-7 VC7203 User Manual

VC7203 GTX Transceiver Characterization Board www.xilinx.com 31
UG957 (v1.3) October 17, 2014
Detailed Description
Note: FMC3 is not supported by the XC7VX485T device. The I/O banks that connect to FMC3 are
not available in this device.
Note: The V
ADJ
voltage on the three FMC HPC connectors tracks VCCO_HP.
The FMC HPC connectors on the VC7203 board are identified as FMC1 at JA2, FMC2 at
JA3 and FMC3 at JA4. The connections for each of these connectors are listed in Table 1-18
and Table 1-19, page 35 respectively.
Table 1-18: VITA 57.1 FMC1 HPC Connections at JA2
U1 FPGA Pin Net Name FMC Pin
AJ32 FMC1_CLK0_M2C_P H4
AK32 FMC1_CLK0_M2C_N H5
AL31 FMC1_CLK1_M2C_P G2
AL32 FMC1_CLK1_M2C_N G3
AD32 FMC1_CLK2_BIDIR_P K4
AD33 FMC1_CLK2_BIDIR_N K5
AC34 FMC1_CLK3_BIDIR_P J2
AD35 FMC1_CLK3_BIDIR_N J3
AV40 FMC1_HA00_CC_P F4
AW40 FMC1_HA00_CC_N F5
AY39 FMC1_HA01_CC_P E2
AY40 FMC1_HA01_CC_N E3
AT41 FMC1_HA02_P K7
AU42 FMC1_HA02_N K8
AY42 FMC1_HA03_P J6
BA42 FMC1_HA03_N J7
AU41 FMC1_HA04_P F7
AV41 FMC1_HA04_N F8
BA41 FMC1_HA05_P E6
BB41 FMC1_HA05_N E7
AW41 FMC1_HA06_P K10
AW42 FMC1_HA06_N K11
AJ30 FMC1_HA07_P J9
AK30 FMC1_HA07_N J10
AF29 FMC1_HA08_P F10
AG29 FMC1_HA08_N F11
AK28 FMC1_HA09_P E9
AK29 FMC1_HA09_N E10
Send Feedback

Xilinx Virtex-7 VC7203 Specifications

General

FPGA Family	Virtex-7
Transceiver	GTH
GTH Transceivers	16
Maximum Data Rate	13.1 Gbps
Transceivers	16
Maximum Transceiver Speed	13.1 Gbps
Maximum User I/O	600
Process Technology	28nm
Block RAM	38 Mb
Power Supply Voltage	0.9V
Operating Temperature Range	Industrial