Xilinx ZC706 User Manual

ZC706 Evaluation Board User Guide www.xilinx.com 109
UG954 (v1.5) September 10, 2015
Installing the ZC706 Board in a PC Chassis
7. The ZC706 board is taller than standard PCIe cards. Ensure that the height of the card is
free of obstructions.
8. Connect the ATX power supply to the ZC706 board using the ATX power supply adapter
cable as shown in Figure D-1:
a. Plug the 6-pin 2 x 3 Molex connector on the adapter cable into J22 on the ZC706
board.
b. Plug the 4-pin 1 x 4 peripheral power connector from the ATX power supply into the
4-pin adapter cable connector.
9. Slide the ZC706 board power switch SW1 to the ON position. The PC can now be
powered on.
Send Feedback

Xilinx ZC706 Specifications

General

Brand	Xilinx
Model	ZC706
Category	Motherboard
Language	English