Xorcom XP0100P - Call Forward; Intercom

XP0100 Enterprise IP Phone Using the Basic Call Functions
Xorcom Ltd. 30 www.xorcom.com
Call Forward
This feature allows you to forward an incoming call to another phone number, such as
a cell phone or voice mailbox.
The following call forwarding events can be configured:
 Always: Incoming calls are immediately forwarded.
 Busy: Incoming calls are immediately forwarded when the phone is busy.
 No Answer : Incoming calls are forwarded when the phone is not answered after a
specific ring times.
To enable Call Forward via phone user interface:
1) Press ->Features->Forward.
2) Select the desired forward type, and then press .
3) Press Left/Right navigation key to select Enable from the proper field.
4) Enter the number in the Forward to field.
5) (Optional.) Enter On Code in the On Code field.
6) (Optional.) Enter Off Code in the Off Code field.
7) Press to save the change or to cancel..
To configure Call Forward via web user interface:
Click on Phone->Features to do the relating change. Please refer the configuration
information above.
Intercom
Intercom mode is useful in an office environment as a quick access to connect to the
operator or the secretary.
To configure Intercom via phone user interface:
1) Press ->Features->Intercom.
2) Press Left/Right navigation key to select Enable/Disable from the Intercom
Allow field to set whether to answer the incoming intercom calls.
3) Press Left/Right navigation key to select Enable/Disable from the Intercom
Mute field to set whether to mute the incoming intercom calls automatically.
4) Press Left/Right navigation key to select Enable/Disable from the Intercom
Tone field to set whether to play ring tones when there is incoming intercom calls
to your extension.
5) Press Left/Right navigation key to select Enable/Disable from the Intercom
Barge field to set whether to answer the incoming intercom calls during a
conversation. If the option is enabled, when there is an incoming intercom call to
your extension and you are on an intercom conversation, it will refuse the call
automatically. Otherwise it will put the current call on hold and answer the
incoming intercom.
6) Press to save the change or to cancel.