XP0100 Enterprise IP Phone Using the Advanced Phone Functions
Xorcom Ltd. 42 www.xorcom.com
Zero-sp-touch
Zero-sp-touch can help users to configure AUTOP and network parameters quickly.
First to enable this function via web user interface, when the power is on or press the
corresponding DSS key, the phone will turn to the zero-sp-touch interface.
To enable Zero-sp-touch when the power is on via web user interface:
1) Click on Phone->Auto Provision.
2) Select Enabled from the pull-down list of Zero Active.
3) Enter the time in the Wait Time field.
4) Click Confirm to save the change.
When reboot the phone, first a pull-down menu come into view.
1) No operation or press , it will return to idle status.
2) Press to enter Auto Provision setting interface. Enter the corresponding
contents, and press to save the change or to cancel
System Log Export
If there are any errors happened in your phone, you can export the system log and send
them to your system administrator for diagnosis.
To export the System Log via web user interface:
1) Click on Phone->Configuration.
2) Scroll to Export System Log field.
3) Select Local and then click Export to export the file to your local system.
You can also export the file to a server. Contact your system administrator for more
information.
PCAP Trace Export
The PCAP Trace used to record the date transport of your IP phone. If there are any
errors in your phone, you can export the PCAP trace and send them to your system
administrator for diagnosis.
To export the PCAP Trace:
1) Click on Phone->Upgrade.
2) Scroll to PCAP Trace field, click Start to begin to capture the trace, and click Stop
to stop capture the trace.
3) Click Export to export the file to your local system.
To Next Page
Loading...
