XP0100 Enterprise IP Phone Using the Basic Call Functions
Xorcom Ltd. 31 www.xorcom.com
During an Active Call
Mute
This function allows you to mute the microphone of the active audio device during a call.
You cannot be heard by the other party, but still hear all other parties while mute is
enabled. When you press the Mute key, all of the conversation will be muted.
To mute/resume a conversation:
Press during a conversation to mute the call, the icon will be shown on the
LCD screen, and the power indication LED will blink. Press the key again to get the
phone return to normal conversation.
You can configure to enable or disable the Mute feature via web user interface.
To enable/disable Mute feature via web user interface:
1) Click on Phone->Features.
2) Select Enabled or Disabled from the pull-down list of Allow Mute.
3) Click Confirm to save the change.
Call Hold
This call function allows you to place an active call on hold. In this case your IP PBX
might play a melody or message to the other party while waiting. Other calls can be
received and made while having a call on hold.
To hold/resume a call:
1) Press to put your active call on hold.
2) If there is only one call on hold, press again to retrieve the call.
3) If there is more than one call on hold, press the Up/Down navigation key to select
a call, and then press to retrieve the call.
The phone will beep softly to remind you that you have calls on hold if Play Hold Tone
feature is enabled.
To enable Play Hold Tone feature via web user interface:
1) Click on Phone->Features.
2) Select Enabled from the pull-down list of Play Hold Tone.
3) Enter the delay time in the Play Hold Tone Delay field.
4) Click Confirm to save the change.
To Next Page
Loading...
