Xorcom XP0100P - Call Transfer and Conference

XP0100 Enterprise IP Phone Using the Basic Call Functions
Xorcom Ltd. 32 www.xorcom.com
Call Waiting
This call feature allows your phone to accept other incoming calls to the extension no
matter under which circumstances.
To enable/disable Call Waiting via phone user interface:
1) Press ->Features->Call Waiting.
2) Press Left/Right navigation key to select Enable/Disable from the Call Waiting
field.
3) Press Left/Right navigation key to select Enable/Disable from the Play Tone field.
This option used to define whether to play ring tones when there is an incoming
during an active call.
4) Press to save the change or to cancel.
To enable/disable Call Waiting via web user interface:
Click on Phone->Features to do the relating change.
Call Transfer
You can customize your phone so that incoming calls are transferred to the third party
such as another extension, mobile phone number, etc. There are three ways to transfer
the call: Blind Transfer, Attended Transfer and Semi-Attended Transfer.
To perform a Blind Transfer via phone user interface:
1) Press during an active call, the call is placed on hold.
2) Dial the telephone number of the third party and then press .
3) Press to finish the transfer.
To perform a Semi-Attended Transfer via phone user interface:
1) Press during an active call, the call is placed on hold.
2) Dial the telephone number of the third party and then press .
3) Press when receiving ring-back tone.
4) Press to finish the transfer.
To perform an Attended Transfer via phone user interface:
1) Press during an active call, the call is placed on hold.
2) Dial the telephone number of the third party and then press .
3) Press when C answers the call.
4) Press to finish the transfer.
Note:
Make sure that the SIP server you have registered supports this function.