Xorcom XP0100P - Action URL Variables and Action URI

XP0100 Enterprise IP Phone Using the Advanced Phone Functions
Xorcom Ltd. 57 www.xorcom.com
To configure Action URL via web user interface:
1) Click on Phone->Action URL.
2) Enter a HTTP URL in the proper field.
3) Click Confirm to save the change.
Note:
Action URL is allowed to be HTTPS URL. Contact with your system administrator
for more information.
The following table provides variables can be used in the Action URL:
Parameter
Descriptions
$mac
MAC Address of the phone
$ip
IP Address of the phone
$model
Device model name of the phone
$firmware
Firmware version of the phone
$active_url
SIP URI of the active user
$active_user
User part of the SIP URI of the active user
$active_host
Host part of the SIP URI of the active user
$local
SIP URI of the caller
$remote
SIP URI of the callee
$display_local
Display name of the caller
$display_remote
Display name of the callee
$call_id
Call id
$duration
Call duration
$callDirection
Indication of the call as sender or recipient
Action URI
Opposite to Action URL, Action URI allows the phone to interact with web server
applications by receiving and handling HTTP GET requests. To simply verify this feature,
you can enter the following string into the browser address bar and press Enter:
http://192.168.10.5/cgi-bin/ConfigManApp.com?key=DNDOn
Then the phone with the IP Address of 192.168.10.5, if existed, will turn on DND.
Be aware that only predefined phone events are supported by the phone.
The following table provides the predefined phone events:
Phone Events
Descriptions
key=OK
Press the √ key
key=SPEAKER
Press the Speaker key
key=F_TRANSFER
Press the Transfer key
key=VOLUME_UP
Increase the volume
key=VOLUME_DOWN
Reduce the volume