XVision pro-hd - PTZ Setting

XC Camera Setup and OSD Guide
PTZ Setting
 PTZ setting: Set the preset, cruise, tracking, etc. Shown below.
 Preset setting: Adjust the camera to the appointed angle and location through
directional buttons, and then select a preset number on the preset drop down list,
click to set it.
 Call preset: Select a preset number which you want to call on the preset drop down
list, then click to call it.
 Cruise: 255 presets addable, cruise time 1-255s adjustable, cruise speed 1-10 levels
selectable. All cruise tracking can be called and delete independently.
 Tracking path setting: Select a tracking number on the tracking drop down list, then
click , after a moving your PTZ camera, click to complete and store the
tracking path.
 Call tracking path: Select a tracking number on the tracking drop down list, click to
call it.
 Cyclotron arrow: Restore the default parameters. Shown below.