Xylem LOWARA e-SV Series Installation, Operation And Maintenance Manual

en - Original instructions
12 e-SV series - Installation, Operation and Maintenance Manual
Figure 6: Identification code for models 1, 3, 5, 10, 15, 22SV
Position
number
Description
Notes
1
Rated flow rate
22 = m
3
/h
2
Series name
SV
3
Motor operation
Empty = standard
H = with Hydrovar®
X = other drivers
E = e-SM
4
Number of impeller
10 = 10 impellers
5
Standard materials
F = AISI 304, round flanges (PN 25)
T = AISI 304, oval flanges (PN 16)
R = AISI 304, overlapping ports, round flanges (PN 25)
N = AISI 316, round flanges (PN 25)
V = AISI 316, Victaulic® couplings (PN 25)
P = AISI 316, Victaulic® couplings (PN 40)
C = AISI 316, DIN 32676 Clamp couplings (PN 25)
K = AISI 316, DIN 11851 thread couplings (PN 25)
X = custom version
6
Special versions
Empty = standard
L = Low NPSH, round flanges, PN 25 (versions F, N, R)
H = high temperature 150°C, round flanges, PN 25
(versions F, N)
B = high temperature 180°C, round flanges, PN 25
(version N)
E = passivated and electropolished (versions N, V, C, K,
P)
W = high temperature 150° and low NPSH (versions F, N)
Y = high temperature 180° and low NPSH (version N)
U = passivated, electropolished and low NPSH (versions
N, V, C, K, P)
I = high temperature 150°, passivated and electropolished
(version N)
S = high temperature 180°, passivated and
electropolished (version N)
A = high temperature 150°, passivated, electropolished
and low NPSH (version N)
D = high temperature 180°, passivated, electropolished
and low NPSH (version N)
X = custom version
7
Motor rated power
kW X 10
8
Number of poles
Empty = 2 poles
4 = 4 poles
P = e-SM
9
Frequency
Empty = 50 Hz
6 = 60 Hz
0 = e-SM
10
Phase
Empty = pump only
M = Single-phase
T = Three-phase
11
Other information
Empty = standard version
Other = see technical catalogue
EHM_M0005_A_sc
2 2 S V 1 0 F L 1 1 0 T
1
13
1 15 16
18
19
110 111
1 2 4 7

Xylem LOWARA e-SV Series Specifications

General

Brand	Xylem
Model	LOWARA e-SV Series
Category	Water Pump
Language	English