COMMON TASKS
Yaesu FT-8800R Operating Manual (courtesy of W5JCK) Page 14 of 83
Program the Microphone Buttons
Default FT−8800R key functions have been assigned to the MH−48A6J Microphone ,
, , and buttons at the factory. These may be changed by the user, if you wish to
utilize another function on one of these keys. (See MH−48A6J Microphone Overview on page
12 for details.)
To program the function assigned to a key:
1. Press the SET key momentarily to enter the Set mode.
2. Rotate the DIAL knob to select the Menu Item to be configured:
• To program the button select Menu #28 PG P1
• To program the button select Menu #29 PG P2
• To program the button select Menu #30 PG P3
• To program the button select Menu #31 PG P4
3. Press the DIAL knob momentarily, then rotate the DIAL knob to select the
function you wish to assign to the button you selected in the previous step.
4. Press the SET key to save the new setting, then rotate the DIAL knob to
select another programmable button to modify, if desired, and repeat the above steps.
5. Press and hold in the DIAL knob for ½ second to exit to normal operation.
Programming Options for the Buttons
BAND function (factory default for button)
• Press the button to toggle the Main band of operation between the Left band and right
band.
• Press and hold the button for ½ second to switch operating band on the Main band.
HOME (HM) function
• Press the button to switch operation to the Home Channel on the Main band.
• Press and hold the button for ½ second to activate the Priority Scanning.
To Next Page
Loading...
