MENU (SET) MODE
Yaesu FT-8800R Operating Manual (courtesy of W5JCK) Page 77 of 83
Menu h 26 PKT.SPD
Function:
Sets the transceiver’s circuitry for the Packet baud rate to be used.
Values:
1200BPs, 9600BPs
Default:
1200BPs
The value for this Menu Item is to be applied separately to each Hyper
Memory Channel.
Menu h 27 PKT.RXB
Function:
Sets the receiving band for Packet operation. Note: Packet transmit band is fixed on
the Main band.
Values:
MAIN, R-FIX, L-FIX
MAIN
Packet can be operated on the Main band.
R-FIX
Packet can be operated on the right band only.
L-FIX
Packet can be operated on the left band only.
Default:
MAIN
The value for this Menu Item is to be applied separately to each Hyper
Memory Channel.
Menu #28 PG P1
Function:
Programs the MH−48A6J microphone’s P1 button assignment.
See Program the Microphone Buttons on page 14 for details.
Values:
BAND, VFO/MR, SCAN, SQL.OFF, TCALL, RPTR, PRI, LOW, TONE, MHz, REV, HOME
Default:
BAND
To Next Page
Loading...
