Yaesu FT-8800R User Manual

MENU (SET) MODE
Yaesu FT-8800R Operating Manual (courtesy of W5JCK) Page 70 of 83
Menu Items
Menu items are listed in numeric order.
Menu #1 APO
Function: Selects the Automatic Power Off time (time until power is turned off).
See Activate Automatic Power Off on page 26 for details.
Values:
OFF, 0.5 H – 12.0 H in 0.5 hour multiples
Default:
OFF (Disables the APO feature)
Menu h 2 ARS
Function: Activates/deactivates the Automatic Repeater Shift feature.
See Automatic Repeater Shifts on page 28 for details.
Values:
ON, OFF
Default:
Depends on the band of operation.
 The value for this Menu Item is to be applied separately to each Hyper
Memory Channel.
Menu h 3 ARTS
Function: Selects the ARTS beep mode.
See Auto Range Transponder System Overview on page 56 for details.
Values:
IN RNG, ALWAYS
IN RNG
Activates the ARTS feature; a high tone beep will sound when the
transceiver first detects that you are within range, and a low beep will sound
when the other station goes out of range.
ALWAYS
Activates the ARTS feature; a high tone beep will sound every time a polling
transmission is received from the other station, and a low beep will sound
once when the other station goes out of range.
Default:
 The value for this Menu Item is to be applied separately to each Hyper
Memory Channel.

Yaesu FT-8800R Specifications

General

Brand	Yaesu
Model	FT-8800R
Category	Transceiver
Language	English