DTX-MULTI 12
52
If “Trigger” was selected:
UTIL7-2-3 <Src>
U01:MyTrigger
Settings
Kit: U001 to U200
Wave: WV001 to WV500
Pattern: ♪U001 to ♪U050
Trigger: U01 to U10
6
When you have selected the file to be loaded,
press the [ENTER] button.
7
Select a destination for the data to be loaded.
The [-/DEC] and [+/INC] buttons can be used to select
the number of the User kit, wave, User pattern, or User
trigger to be overwritten with the loaded data.
If “Kit” was selected:
UTIL7-2-4 <Dst>
U001:User Kit
If “Wave” was selected:
UTIL7-2-4 <Dst>
WV001:Empty Wave
If “Pattern” was selected:
UTIL7-2-4 <Dst>
U001:Empty Ptn
If “Trigger” was selected:
UTIL7-2-4 <Dst>
U01:User Trigger
Settings
Kit: U001 to U200
Wave: WV001 to WV500
Pattern: ♪U001 to ♪U050
Trigger: U01 to U10
8
When you have selected the file to be loaded,
press the [ENTER] button.
You will be asked to confi rm that the data is to be loaded.
Load File
Are you sure?
9
To proceed, press the [ENTER] button.
The following message will be displayed as the data is
being loaded.
Now loading...
[EXIT] to cancel
CAUTION
• Do not unplug the USB memory device from the USB TO
DEVICE port or turn off either the memory device or the DTX-
MULTI 12 while data is being loaded. Failure to observe this
precaution can lead to the memory device or the DTX-MULTI
12 being permanently damaged.
When the data has been loaded, the display will return to
the Load File page (UTIL7-2).
UTIL7-2 <FILE>
Load File
w
w
w
.
x
i
a
o
y
u
1
6
3
.
c
o
m
Q
Q
3
7
6
3
1
5
1
5
0
9
9
2
8
9
4
2
9
8
T
E
L
1
3
9
4
2
2
9
6
5
1
3
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com
To Next Page
Loading...
