69W3D1X
16
Checking the gearshift and throttle
operation
1. Check that the gearshift operates
smoothly when the remote control lever
or shift lever is shifted from neutral into
forward or reverse.
2. Check that the throttle operates smoothly
when the remote control lever or throttle
grip is shifted from the fully closed posi-
tion to the fully open position
a
.
È
Tiller handle model
É
Remote control model
Checking the tilt system
1. Check that the outboard motor tilts up
and down smoothly when operating the
power trim and tilt unit.
2. Check that there is no abnormal noise
produced when the outboard motor is
tilted up or down.
3. Check that there is no interference with
wires and hoses when the tilted-up out-
board motor is steered.
4. Check that the trim meter points down
when the outboard motor is tilted all the
way down.
Checking the engine start switch and
engine stop switch/engine shut-off
switch
1. Check that the engine starts when the
engine start switch is turned to START.
2. Check that the engine turns off when the
engine start switch is turned to OFF.
3. Check that the engine turns off when the
engine stop switch is pushed or the
engine shut-off cord is pulled from the
engine shut-off switch.
È
Tiller handle model
É
Remote control model
È
S69W1150
F
N
R
É
È
S69W1170
É
Predelivery checks
To Next Page
Loading...
