Yamaha F60A - General; Checking the Anodes

69W3D1X
38
4. Check the thermostat valve opening at
the specified water temperatures.
Replace if out of specification.
5. Install the thermostat, new gasket, ther-
mostat cover, and cover.
General
3
Checking the anodes
1. Check the anodes and trim tab for
scales, grease, or oil. Clean if necessary.
CAUTION:
Do not oil, grease, or paint the anodes,
otherwise they will be ineffective.
2. Replace the anodes and trim tab if
excessively eroded.
Water
temperature
Valve lift
a
60 °C (140 °F) Valve begins to lift
above
70 °C (158 °F)
more than
3.0 mm (0.12 in)
S69W3050
S69W3110
Top cowling / Fuel system / Power unit / General