i
Outboard Rigging Guide - 2001
INTRODUCTION
Yamaha Service assumes that those using this
Outboard Rigging Guide manual are aware of
standard rigging techniques. This manual pro-
vides specialized information for rigging 2001
model Yamaha products; it does provide general
rigging instructions. For information about rig-
ging earlier Yamaha outboards, refer to the prop-
er Outboard Rigging Guide or Data edition for the
particular year you are rigging.
Be aware of all information designated by the fol-
lowing notifications:
A CAUTION indicates special procedures that
must be followed to avoid damage to the out-
board motor, accessories, boat, test equipment,
or tools.
AWARNING indicates special procedures that
must be followed to avoid injury to persons
operating the outboard motor or other compo-
nents, or to persons installing or repairing the
motor or other components.
Be aware that warnings alone do not eliminate
dangers, or are they a substitute for safe boat
handling and proper accident-prevention
measures.
1. Introduction
This will include a brief description, model
application, illustrations of components, and
additional parts (if any) needed to install the
component. This introduction should usually
give the rigger information needed to deter-
mine which parts should be used.
2. Installation Instructions
This will include dimensions, mounting
instructions, wiring information, and any
other information needed to install the com-
ponent.
3 Parts Information
Where appropriate, there will be an exploded
diagram of all parts for a particular compo-
nent. These exploded diagrams will usually
not include part numbers. For the latest part
numbers for ordering replacement parts, refer
to the parts microfiche, or rigging compo-
nents microfiche.
To Next Page
Loading...
