3 - 68
CHK
ADJ
CHECKING AND LUBRICATING THE CABLES/
LUBRICATING THE LEVERS AND PEDALS/
LUBRICATING THE SIDESTAND
EAS00170
CHECKING AND LUBRICATING THE
CABLES
The following procedure applies to all of the
cable sheaths and cables.
WARNING
@
Damaged cable sheaths may cause the
cable to corrode and interfere with its
movement. Replace damaged cable
sheaths and cables as soon as possible.
1. Check:
• cable sheath
Damage
→
Replace.
2. Check:
• cable operation
Rough movement
→
Lubricate.
NOTE:
@
Hold the cable end upright and pour a few
drops of lubricant into the cable sheath or use
a suitable lubricating device.
Recommended lubricant
Engine oil or a suitable cable
lubricant
EAS00171
LUBRICATING THE LEVERS AND PEDALS
Lubricate the pivoting point and metal-to-metal
moving parts of the levers and pedals.
Recommended lubricant
Lithium soap base grease
EAS00172
LUBRICATING THE SIDESTAND
Lubricate the pivoting point and metal-to-metal
moving parts of the sidestand.
Recommended lubricant
Lithium soap base grease
To Next Page
General
