3 - 77
CHK
ADJ
CHECKING THE FUSES/
REPLACING THE HEADLIGHT BULBS
WARNING
@
Never use a fuse with an amperage rating
other than that specified. Improvising or
using a fuse with the wrong amperage rat-
ing may cause extensive damage to the
electrical system, cause the lighting and
ignition systems to malfunction and could
possibly cause a fire.
4. Install:
• front-right inner panel (front cowling)
• right inner panel (front cowling)
• left inner panel (front cowling)
Refer to “COWLINGS AND COVERS”.
EAS00183
REPLACING THE HEADLIGHT BULBS
The following procedure applies to both of the
headlight bulbs.
1. Disconnect:
• headlight coupler
1
2. Remove:
• headlight bulb cover
2
3. Detach:
• headlight bulb holder
1
4. Remove:
• headlight bulb
2
WARNING
@
Since the headlight bulb gets extremely
hot, keep flammable products and your
hands away from the bulb until it has
cooled down.
To Next Page
General
