Yamaha FZ 25 2021 - Page 26

1-17
GEN
INFO
FEATURES
Instantaneous fuel consumption
• “Km/L”: The distance that can be traveled on
1.0 L of fuel under the current riding conditions
is shown.
TIP
If traveling at speeds under 10 km/h (6 mi/h),
“_ _._” is displayed.
Average fuel consumption
This shows the average fuel consumption
since it was last reset.
• “AVE_ _._ Km/L”: The average distance that
can be traveled
on 1.0 L of fuel is shown.
To reset the average fuel consumption, push
the “S
ELECT” button for one second.
TIP
After resetting the average fuel consumption,
“_ _._” is shown until the vehicle has traveled
0.1 km (0.06 mi).
Clock
To set the clock
1. Turn the key to “ ”.
2. Push the “SELECT” switch to change the dis-
play to the clock mode.
3. Push the “SELECT” button for two sec
onds,
and the hour digits will start flashing.
4. Use the “SELECT” button to set the hours.
5. Push the “SELECT” button for two seconds,
and the minute digits will start flashing.
6. Use the “SELECT” button to set the minutes.
7. Push the “SELECT” button for two seconds to
confirm settings and start the clock.
Self
-diagnosis mode
This model is equipped with a self-diagnosis
function for various electrical circuits.
If a problem is detected in any of those circuits,
the engine
trouble warning light will come on
and the display will indicate an error code.
If the display indicates any error codes, note
the code number and
have
a Yamaha dealer
check the vehicle.
ECA11591
NOTICE
If the display indicates an error code, the
vehicle should be checked as soon as pos
-
sible in order to avoid engine damage.
1. Instantaneous fuel consumption display
1. Average fuel consumption display
1. Clock
AVE
1. Engine trouble warning light “ ”
2. Error code display
ABS
B9X-F8197-E0.book Page 17 Thursday, July 16, 2020 2:28 PM