18
Multi Filter
3-band multi-filter (24 dB/octave).
Reverb+Chorus
Reverb and chorus effects in parallel.
Reverb->Chorus
Reverb and chorus effects in series.
Parameter Display Range Description
Type 1 TYP1
Low Pass Filter, High Pass Filter,
Band Pass Filter
Filter 1 type: high pass, low pass, band pass
Freq. 1 FRQ1 28.0 Hz to 16.0 kHz Filter 1 frequency
Level 1 LVL1 0 to 100 Filter 1 level
Resonance 1 RES1 0 to 20 Filter 1 resonance
Mix MIX 0 to 100% Mix level
Type 2 TYP2
Low Pass Filter, High Pass Filter,
Band Pass Filter
Filter 2 type: high pass, low pass, band pass
Freq. 2 FRQ2 28.0 Hz to 16.0 kHz Filter 2 frequency
Level 2 LVL2 0 to 100 Filter 2 level
Resonance 2 RES2 0 to 20 Filter 2 resonance
Type 3 TYP3
Low Pass Filter, High Pass Filter,
Band Pass Filter
Filter 3 type: high pass, low pass, band pass
Freq. 3 FRQ3 28.0 Hz to 16.0 kHz Filter 3 frequency
Level 3 LVL3 0 to 100 Filter 3 level
Resonance 3 RES3 0 to 20 Filter 3 resonance
Parameter Display Range Description
Wave WAVE Sine, Triangle Modulation waveform
Initial Delay IDLY 0.0 to 500.0 ms Initial delay before reverb begins
Freq. FREQ 0.05 to 40.00 Hz Modulation speed
Mod. Delay MDT 0.0 to 500.0 ms Modulation delay time
Reverb Time RT 0.3 to 99.0 s Reverb time
High Ratio HRAT 0.1 to 1.0 High-frequency reverb time ratio
Diffusion DIFF 0 to 10 Left and right reverb spread
Density DNST 0 to 100% Reverb density
High Pass Filter HPF Thru, 21.2 Hz to 8.00 kHz High-pass filter cutoff frequency
Low Pass Filter LPF 50.0 Hz to 16.0 kHz, Thru Low-pass filter cutoff frequency
Reverb/Chorus BAL 0 to 100% Reverb and chorus balance (0% = all reverb, 100% = all chorus)
AM Depth AMDP 0 to 100% Amplitude modulation depth
PM Depth PMDP 0 to 100% Pitch modulation depth
Mix MIX 0 to 100% Mix level
Parameter Display Range Description
Wave WAVE Sine, Triangle Modulation waveform
Initial Delay IDLY 0.0 to 500.0 ms Initial delay before reverb begins
Freq. FREQ 0.05 to 40.00 Hz Modulation speed
Mod. Delay MDT 0.0 to 500.0 ms Modulation delay time
Reverb Time RT 0.3 to 99.0 s Reverb time
High Ratio HRAT 0.1 to 1.0 High-frequency reverb time ratio
Diffusion DIFF 0 to 10 Left and right reverb spread
Density DNST 0 to 100% Reverb density
High Pass Filter HPF Thru, 21.2 Hz to 8.00 kHz High-pass filter cutoff frequency
Low Pass Filter LPF 50.0 Hz to 16.0 kHz, Thru Low-pass filter cutoff frequency
Reverb Balance BAL 0 to 100%
Reverb and chorused reverb balance
(0% = all chorused reverb, 100% = all reverb)
AM Depth AMDP 0 to 100% Amplitude modulation depth
PM Depth PMDP 0 to 100% Pitch modulation depth
Mix MIX 0 to 100% Mix level
To Next Page
Loading...
