20
Reverb->Symphonic
Reverb and symphonic effects in series.
Reverb->Pan
Reverb and autopan effects in series.
Delay+Early Ref.
Delay and early reflections effects in parallel.
Parameter Display Range Description
Wave WAVE Sine, Triangle Modulation waveform
Initial Delay IDLY 0.0 to 500.0 ms Initial delay before reverb begins
Freq. FREQ 0.05 to 40.00 Hz Modulation speed
Mod. Delay MDT 0.0 to 500.0 ms Modulation delay time
Reverb Time RT 0.3 to 99.0 s Reverb time
High Ratio HRAT 0.1 to 1.0 High-frequency reverb time ratio
Diffusion DIFF 0 to 10 Left and right reverb spread
Density DNST 0 to 100% Reverb density
High Pass Filter HPF Thru, 21.2 Hz to 8.00 kHz High-pass filter cutoff frequency
Low Pass Filter LPF 50.0 Hz to 16.0 kHz, Thru Low-pass filter cutoff frequency
Reverb Balance BAL 0 to 100%
Reverb and symphonic reverb balance
(0% = all symphonic reverb, 100% = all reverb)
Depth DPTH 0 to 100% Modulation depth
Mix MIX 0 to 100% Mix level
Parameter Display Range Description
Wave WAVE Sine, Triangle, Square Modulation waveform
Initial Delay IDLY 0.0 to 500.0 ms Initial delay before reverb begins
Freq. FREQ 0.05 to 40.00 Hz Modulation speed
Reverb Time RT 0.3 to 99.0 s Reverb time
High Ratio HRAT 0.1 to 1.0 High-frequency reverb time ratio
Diffusion DIFF 0 to 10 Left and right reverb spread
Density DNST 0 to 100% Reverb density
High Pass Filter HPF Thru, 21.2 Hz to 8.00 kHz High-pass filter cutoff frequency
Low Pass Filter LPF 50.0 Hz to 16.0 kHz, Thru Low-pass filter cutoff frequency
Reverb Balance BAL 0 to 100%
Reverb and panned reverb balance
(0% = all panned reverb, 100% = all reverb)
Depth DPTH 0 to 100% Modulation depth
Direction DIR
L<–>R, L–>R, L<–R,
Turn L, Turn R
Panning direction
Mix MIX 0 to 100% Mix level
Parameter Display Range Description
Delay L DT.L 0.0 to 1000.0 ms Left channel delay time
Delay R DT.R 0.0 to 1000.0 ms Right channel delay time
FB. Delay DTFB 0.0 to 1000.0 ms Feedback delay time
FB. Gain FB –99 to +99%
Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
High Ratio HRAT 0.1 to 1.0 High-frequency feedback ratio
High Pass Filter HPF Thru, 21.2 Hz to 8.00 kHz High-pass filter cutoff frequency
Low Pass Filter LPF 50.0 Hz to 16.0 kHz, Thru Low-pass filter cutoff frequency
Delay/ER BAL 0 to 100%
Delay and early reflections balance
(0% = all delay, 100% = all early reflections)
Mix MIX 0 to 100% Mix level
Type TYPE
Small Hall, Large Hall, Random,
Reverse, Plate, Spring
Type of early reflection simulation
Initial Delay IDLY 0.0 to 500.0 ms Initial delay before reverb begins
Room Size SIZE 0.2 to 20.0 Reflection spacing
Liveness LIVE 0 to 10 Early reflections decay characteristics (0 = dead, 10 = live)
Diffusion DIFF 0 to 10 Left and right early reflections spread
Density DNST 0 to 100% Reverb density
ER Number ERNO 1 to 19 Number of early reflections
To Next Page
Loading...
